1,033 found, showing page 8 of 26
$16.49
3/8x12 DRILL BIT
12" aircraft bits designed for extra reach and deep hole drilling, 1/8" thru 1/2" by 16ths. Carded for easy display. For drilling through metal, wood, fiberglass, stainless steel.
View Details
$16.99
UNDERLAYMENT BIT
X-bits. Cuts underlayment, hardboard, fiberock, and other cement board. Precision of 1/8" bits and strength of 1/4" bits. 5/32" shank. For use in Rotozip cut-out tools. 1 bit per pack.
View Details
$15.99
*MULTIPURPOSE BIT*************
X-bits. The most versatile bit for all types of wood and wood composites up to 1" thick, fiberglass, solid surface material, vinyl siding, aluminum siding, plastics, and laminates. Precision of 1/8" bits and strength of 1/4" bits. 5/32" shank. For use in Rotozip cut-out tools. 2 bits per pack.
View Details
$16.99
*BIT TILE
X-bits. Cuts ceramic wall tile, cement board, and plaster (will not cut floor tile). For use in Rotozip cut-out tools.
View Details
$22.49
1/2x12 DRILL BIT
12" aircraft bits designed for extra reach and deep hole drilling, 1/8" thru 1/2" by 16ths. Carded for easy display. For drilling through metal, wood, fiberglass, stainless steel.
View Details
$5.79
DRILL STOP
Use with twist drills to prevent excessive penetration. For controlling depth when drilling holes through multiple surfaces. Black oxide finish on cold rolled steel. Sizes included: 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2". Includes hex wrench.
View Details
$16.99
LAMINATE FLOORCUT X-BIT
X-bits. Cuts a variety of laminate flooring materials with ease. This carbide bit was developed specifically for excellent performance and long life in cutting laminate flooring. Also cuts through hard and soft wood flooring, plywood, and other wood-based materials. 5/32" diameter bit.
View Details
$19.99
METAL CUTTING XBIT
X-bits. Metal cutting bit can cut up to 18-gauge steel including, but not limited to, HVAC, steel studs, aluminum siding, etc. The bit tip allows for plunging directly into the workpiece which makes the start of the cut much easier. 5/32" diameter. High-speed steel.
View Details
$16.99
CARBIDE FIBEROCK BIT
X-bits. Carbide bit for cutting fiberock panels. 1/4" diameter.
View Details
$22.99
5/32x6 HAMMERDRILL BIT DIABLO
5/32X6 HAMMERDRILL BIT
View Details
$24.49
4pc DIB GLASS/TILE BIT SET
Glass and tile drill bit set. 4-piece drill bit set includes: 1/8", 3/16", 1/4", and 5/16".
View Details
$24.99
3/16x6 HAMMERDRILL BIT DIABLO
3/16X6 HAMMERDRILL BIT
View Details
$6.99
7/32x6 HAMMERDRILL BIT DIABLO
7/32X6 HAMMERDRILL BIT
View Details
$7.79
1/4x6 HAMMERDRILL BIT DIABLO
1/4X6 HAMMERDRILL BIT
View Details
$10.79
1/4" PLUG CUTTER
Recommended for covering fastener holes in furniture, cabinetry, floors, decks, and other woodworking projects. Also ideal for making dowels. Constructed of hardened, high-carbon steel for added strength and durability. 1/4" shank.
View Details
$10.79
3/8" PLUG CUTTER
Recommended for covering fastener holes in furniture, cabinetry, floors, decks, and other woodworking projects. Also ideal for making dowels. Constructed of hardened, high-carbon steel for added strength and durability. 1/4" shank.
View Details
$10.79
1/2" PLUG CUTTER
Recommended for covering fastener holes in furniture, cabinetry, floors, decks, and other woodworking projects. Also ideal for making dowels. Constructed of hardened, high-carbon steel for added strength and durability. 1/4" shank.
View Details
$10.79
5/8" PLUG CUTTER
Recommended for covering fastener holes in furniture, cabinetry, floors, decks, and other woodworking projects. Also ideal for making dowels. Constructed of hardened, high-carbon steel for added strength and durability. 1/4" shank.
View Details
$9.49
1/8" GLAS/TILE DRILL BIT
Provides smooth, accurate drilling in ceramic tile, mirrors, glass, marble tile, vitrolite, and china. Spear-pointed tip design reduces breakouts when drilling from 1 side. Ideal for drilling fastener holes in bathroom tile or for wall mirror installation. Carbide tipped for long life. 1 per card.
View Details
$40.99
3/8" 5.2AMP DRILL DRIVER
5.2A, 0-1500 rpm (revolutions per minute). Perfect for drilling holes in wood, metal, plastic, and driving screws. Keyless chuck for quick and easy bit changes. Variable speed for controlled drilling and driving. Bubble level aids in accurate drilling. On-board bit storage allows for quick access to screwdriving bits.
View Details
$219.99
1" SDS PLUS HAMMER DRILL
Designed for the toughest applications, the 1 In. SDS Plus D-Handle Rotary Hammer lasts longer and drills faster than other tools in its class. With a powerful 8 Amp motor, it delivers 0-1620 RPM, 0-5860 BPM and 2.1 Ft./Lb. of torque. Three-mode operation - choose rotary hammer, hammer only and rotation only for maximum versatility. A mechanical clutch protects the motor when the bit binds. Variable position chisel stop allows material to be adjusted, regardless of orientation. Rotating brush plate provides equal power in forward and reverse for easy removal of jammed bits, plus extends brush life. At just 6.1 pounds, this rotary hammer is easy to use and helps avoid user fatigue. The kit includes a side handle, depth rod and carrying case.
View Details
$25.99
1/4x6 HAMMERDRIL BIT DIABLO
1/4X6 HAMMERDRIL BIT
View Details
$8.39
5/16x6 HAMMERDRILL BIT DIABLO
5/16X6 HAMMERDRILL BIT
View Details
$11.79
5/16x10 HAMMERDRILL BIT DIABLO
5/16X10 HAMMERDRILL BIT
View Details
$199.99
20VMAX XR 3" CUTOFF TOOL
20VMAX XR 3" CUTOFF TOOL
View Details
$29.99
21pc DRILL/DRIVE SET
Utility set has drill and driving bits. Titanium bits last up to 5 times longer. Set includes 1 each: No. 1, No. 2, No.3 Phillips bits; No. 0, No. 1, No. 2 - 2" square recess bits; No. 6-8, No. 8-10 slotted bits; 1/4", 5/16", 3/8", 7/16" nonmagnetic quick change bits; universal quick change adapter; 1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4" titanium bits; convenient storage case.
View Details
$172.49
18V SUBCMPCT IMPCT WRNCH
18V SUBCMPCT IMPCT WRNCH
View Details
$16.49
3/8x12 HAMMERDRILL BIT DIABLO
3/8X12 HAMMERDRILL BIT
View Details
$10.49
7/16x6 HAMMERDRILL BIT DIABLO
7/16X6 HAMMERDRILL BIT
View Details
$8.59
10PK 3-1/8 80G TRI SAND
10PK 3-1/8 80G TRI SAND
View Details
$64.99
4CT 1-1/8X16X18 MX4 SDS+
MILWAUKEE MX4 4-Cutter SDS Plus Rotary Hammer-Drill Bits provide up to 4x Life in Rebar and up to 20\% more holes per charge in cordless rotary hammers. The enhanced rebar guards and 4-Cutter 90 degree head design provide increased life and durability in hard aggregate and rebar. Breaker point pulverizes the material more effectively, resulting in faster drilling speeds. The variable flute allows for maximum debris extraction leading to up 20\% more holes per charge in cordless rotary hammers while making it a very durable bit in corded and cordless rotary hammers. Additionally, MX4 features a centering tip for exact spot drilling, wear mark indicator indicating when the bit no longer meets ANSI diameter requirements, and a reinforced flute for durability and minimized vibration. A welded tip is featured from sizes 3/16" to 5/16". The increased life and efficiency of the MX4 4-Cutter drill bit line provides the ideal solution in general concreteand reinforced concrete for cordless and corded rotary hammer users.
View Details
$4.89
1/4x6 IRWIN SPADE BIT
Blue-Groove point and cutting edge for faster chip removal. Double cutting spurs scribe the outside of the hole reducing breakout. 10\% larger shank for added durability.
View Details
$4.99
5/16x6 IRWIN SPADE BIT
Blue-Groove point and cutting edge for faster chip removal. Double cutting spurs scribe the outside of the hole reducing breakout. 10\% larger shank for added durability.
View Details
